The 27th Regional Conference of Solid State Science and Technology (RCSSST27) 2013 will be held on 20-22 December 2013 at Kota Kinabalu, Sabah, Malaysia, with the conference theme “Solid State Science & Technology: Towards Immersive Breakthrough”.
The Regional Conference of Solid State Science and Technology (RCSSST) is an annual event in Malaysia. This 27th Conference 2013 is jointly organized by the School of Science and Technology, Universiti Malaysia Sabah as the host, in cooperation with the Malaysian Solid State Science and Technology Society (MASS).
The aim of this conference is to provide a platform for discussions on solid state science and technology in all aspects of physical and chemical properties, preparation and characterization techniques, optical properties; macro-, micro- and nano-structures. In addition, modeling, simulation and measurement methods as well as current developments in technology will also be discussed. The conference details will be posted here from time to time.
Click here for details> http://www.ums.edu.my/conferences/index.php?mod=Publication&action=homeaccess&conf=RCSSST27
Electrochemistry Impedence Spectroscopy
Used for deposition of organic thin Film, Corrosion Rate and ionic Conductivity. Contact HASIAH SALLEH email@example.com
09-6683468. Makmal Asas Fizik, Jabatan Sains Fizik, Fakulti Sains dan Teknologi Universiti Malaysia Terengganu.
IV Measurement SCS4200
This equipment is usefull for measuring the efficiency of organic solar cell. Contact Hasiah Salleh firstname.lastname@example.org. Tel: 09-6683468. Laboratory of Basic Physics, Department of Physical Sciences, Faculty of Science and Technology, University Malaysia Terengganu, 21030 Kuala Terengganu.
Spin coater, magnetic stirrer, fume cupboard. Contact Dewi Suriyani Che Halin. Tel: 0125881153 /0124394748. School of Material Engineering, Universiti Malaysia Perlis, 01000 Jln Bukit Lagi. Kangar, Perlis.
Scanning probe microscopy (SPM) covers several related technologies for imaging and SPM measuring surfaces on a fine scale, down to the level of molecules and groups of atoms. SPM machine also can be utilized for lithographic technique, known as Scanning Probe Lithography (SPL), in which a microscopic or nanoscopic stylus is moved mechanically across a surface to form a pattern. SPL is capable of patterning sub-30nm features with nanometer-scale alignment registration. It is a relatively simple, inexpensive, reliable method for patterning nanometer-scale features on various substrates. It has potential applications for nanometer-scale research, for maskless semiconductor lithography, and for photomask patterning. Contact Dr Sabar D. Hutagalung. Email: email@example.com. Tel: 045996171, Electronic Materials Laboratory, School of Materials and Mineral Resources. Engineering, USM Engineering Campus, 14300 Nibong Tebal, Penang.
MBS 8020 Ultrasonic Data Acquisition System
This system is used to obtain the longitudinal and shear waves velocities travel in any solid samples. By combining density and velocities, all set of elastic modulus (Longitudinal, Shear, Bulk and Young’s moduli) of sample will be determined accurately. The Poisson’s ratio, microhradness and etc will be also calculated. Contact Prof Dr Sidek Hj Ab Aziz, firstname.lastname@example.org, email@example.com. Tel: 603-89466682/6647/6646 Glass and Ultrasonic Studies Centre (GUSC), Department of Physics, Faculty of Science,Universiti Putra Malaysia, 43400 UPM Serdang, Selangor, Malaysia.
Resistivity and Current Density Measurement System
This system is fully computerized to measure the resistivity and current density from 10 Kelvin to room temperature. Suitable for superconducting materials. Contact: Prof. Madya Dr Azhan Hashim @ Ismail. firstname.lastname@example.org. Tel: 09-4602389
Makmal Penyelidikan Sains, Universiti Teknologi Mara Pahang, 26400 Bandar Jengka, Pahang
The 4th International Conference on Solid State Science and Technology (ICSSST 2012) will be held in Malacca, Malaysia from 18-20 December, 2012. ICSSST2012 is organized by Low Dimensional Materials Research Centre, Physics Department, University of Malaya under the patronage of Malaysian Solid State Science & Technology (MASS) Society with Multimedia University as co-organizer. The scientific objectives of this conference is to stimulate the interest of academicians and researchers in Solid Science and Technology field by providing a platform for necessary linkages and interaction involving participants from different regions over the world. The primary theme of the conference is “Innovation in Science & Technology: Towards Sustainable Development”.